1 files changed, 0 insertions, 100 deletions
diff --git a/gcc/config/mips/t-lsi b/gcc/config/mips/t-lsi
deleted file mode 100755
index b771834..0000000
--- a/gcc/config/mips/t-lsi
+++ /dev/null
@@ -1,100 +0,0 @@
-# CYGNUS LOCAL entire file angela
-# ??? The list of multilibs is probably overkill, but is conservatively
-# correct.  We probably don't need single-float, and mips3 libs.
-
-CONFIG2_H	= $(srcdir)/config/mips/ecoff.h
-
-# We have a premade insn-attrtab.c to save the hour it takes to run genattrtab.
-# PREMADE_ATTRTAB = $(srcdir)/config/mips/mips-at.c
-# PREMADE_ATTRTAB_MD = $(srcdir)/config/mips/mips-at.md
-
-# Suppress building libgcc1.a, since the MIPS compiler port is complete
-# and does not need anything from libgcc1.a.
-LIBGCC1 =
-
-EXTRA_MULTILIB_PARTS = crtbegin.o crtend.o
-# Don't let CTOR_LIST end up in sdata section.
-CRTSTUFF_T_CFLAGS = -G 0
-
-# When building a cross compiler, put the mips16 support functions in
-# libgcc1.a.
-CROSS_LIBGCC1 = libgcc1-asm.a
-LIB1ASMSRC = mips/mips16.S
-LIB1ASMFUNCS = _m16addsf3 _m16subsf3 _m16mulsf3 _m16divsf3 \
-	_m16eqsf2 _m16nesf2 _m16gtsf2 _m16gesf2 _m16lesf2 _m16ltsf2 \
-	_m16fltsisf _m16fixsfsi \
-	_m16adddf3 _m16subdf3 _m16muldf3 _m16divdf3 \
-	_m16extsfdf2 _m16trdfsf2 \
-	_m16eqdf2 _m16nedf2 _m16gtdf2 _m16gedf2 _m16ledf2 _m16ltdf2 \
-	_m16fltsidf _m16fixdfsi \
-	_m16retsf _m16retdf \
-	_m16stub1 _m16stub2 _m16stub5 _m16stub6 _m16stub9 _m16stub10 \
-	_m16stubsf0 _m16stubsf1 _m16stubsf2 _m16stubsf5 _m16stubsf6 \
-	_m16stubsf9 _m16stubsf10 \
-	_m16stubdf0 _m16stubdf1 _m16stubdf2 _m16stubdf5 _m16stubdf6 \
-	_m16stubdf9 _m16stubdf10
-
-# We must build libgcc2.a with -G 0, in case the user wants to link
-# without the $gp register.
-TARGET_LIBGCC2_CFLAGS = -G 0
-
-# fp-bit and dp-bit are really part of libgcc1, but this will cause
-# them to be built correctly, so... [taken from t-sparclite]
-LIB2FUNCS_EXTRA = fp-bit.c dp-bit.c
-
-dp-bit.c: $(srcdir)/config/fp-bit.c
-	echo '#ifdef __MIPSEL__' > dp-bit.c
-	echo '#define FLOAT_BIT_ORDER_MISMATCH' >> dp-bit.c
-	echo '#endif' >> dp-bit.c
-	echo '#define US_SOFTWARE_GOFAST' >> dp-bit.c
-	cat $(srcdir)/config/fp-bit.c >> dp-bit.c
-
-fp-bit.c: $(srcdir)/config/fp-bit.c
-	echo '#define FLOAT' > fp-bit.c
-	echo '#ifdef __MIPSEL__' >> fp-bit.c
-	echo '#define FLOAT_BIT_ORDER_MISMATCH' >> fp-bit.c
-	echo '#endif' >> fp-bit.c
-	echo '#define US_SOFTWARE_GOFAST' >> fp-bit.c
-	cat $(srcdir)/config/fp-bit.c >> fp-bit.c
-
-# Build the libraries for both hard and soft floating point
-
-MULTILIB_OPTIONS = msoft-float/msingle-float EL/EB mips1/mips3/mips16
-MULTILIB_DIRNAMES = soft-float single el eb mips1 mips3 mips16
-MULTILIB_MATCHES = msingle-float=m4650
-
-LIBGCC = stmp-multilib
-INSTALL_LIBGCC = install-multilib
-
-# Add additional dependencies to recompile selected modules whenever the
-# tm.h file changes.  The files compiled are:
-#
-#	gcc.c		(*_SPEC changes)
-#	toplev.c	(new switches + assembly output changes)
-#	sdbout.c	(debug format changes)
-#	dbxout.c	(debug format changes)
-#	dwarfout.c	(debug format changes)
-#	final.c		(assembly output changes)
-#	varasm.c	(assembly output changes)
-#	cse.c		(cost functions)
-#	insn-output.c	(possible ifdef changes in tm.h)
-#	regclass.c	(fixed/call used register changes)
-#	cccp.c		(new preprocessor macros, -v version #)
-#	explow.c	(GO_IF_LEGITIMATE_ADDRESS)
-#	recog.c		(GO_IF_LEGITIMATE_ADDRESS)
-#	reload.c	(GO_IF_LEGITIMATE_ADDRESS)
-
-gcc.o: $(CONFIG2_H)
-toplev.o: $(CONFIG2_H)
-sdbout.o: $(CONFIG2_H)
-dbxout.o: $(CONFIG2_H)
-dwarfout.o: $(CONFIG2_H)
-final.o: $(CONFIG2_H)
-varasm.o: $(CONFIG2_H)
-cse.o: $(CONFIG2_H)
-insn-output.o: $(CONFIG2_H)
-regclass.o: $(CONFIG2_H)
-cccp.o: $(CONFIG2_H)
-explow.o: $(CONFIG2_H)
-recog.o: $(CONFIG2_H)
-reload.o: $(CONFIG2_H)