Use libc from agbcc instead of standalone newlib\nYou must have AGBCC commit 80d029caec189587f8b9294b6c8a5a489b8f5f88 in order to compile pmd_red.gbalibc

1 files changed, 0 insertions, 178 deletions

diff --git a/newlib/libc/machine/hppa/strcat.S b/newlib/libc/machine/hppa/strcat.S
deleted file mode 100644
index 8424a4f..0000000
--- a/newlib/libc/machine/hppa/strcat.S
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
- *
- *  To anyone who acknowledges that this file is provided "AS IS"
- *  without any express or implied warranty:
- *      permission to use, copy, modify, and distribute this file
- *  for any purpose is hereby granted without fee, provided that
- *  the above copyright notice and this notice appears in all
- *  copies, and that the name of Hewlett-Packard Company not be
- *  used in advertising or publicity pertaining to distribution
- *  of the software without specific, written prior permission.
- *  Hewlett-Packard Company makes no representations about the
- *  suitability of this software for any purpose.
- */
-
-/* HPUX_ID:	@(#) $Revision: 1.1 $	*/
-/*
- * strcat(s1, s2)
- *
- * Concatenate s2 on the end of s1.  S1's space must be large enough.
- * Return s1.
- */
-#include "DEFS.h"
-
-#define	d_addr  r26
-#define	s_addr  r25
-#define	tmp6    r24
-#define	tmp1    r19
-#define	tmp2    r20
-#define	tmp3    r21
-#define	tmp4    r22
-#define	tmp5	arg3
-#define	save	r1
-
-
-ENTRY(strcat)
-
-	comb,=		r0,s_addr,done	/* quit if s2=NULL */
-        copy      d_addr,ret0          /* The return value is the value of d_addr. DELAY SLOT*/
-
-/* First look for end of s1 (d_addr) */
-
-        extru       d_addr,31,2,tmp1   /* Extract the low two bits of the dest address. */
-	combt,=		tmp1,r0,dont_mask
-	dep		0,31,2,d_addr	/*set word alignment */
-	ldwm		4(d_addr),tmp2
-	sh3add		tmp1,r0,save	/* build mask based on tmp1 */
-	mtctl		save,11
-	zvdepi		-2,32,save
-	or		save,tmp2,tmp2
-	uxor,nbz	tmp2,r0,save
-search:
-	b,n		found_end	/* nullified under uxor conditions above and below */
-dont_mask:
-	ldwm		4(d_addr),tmp2
-	comib,tr	r0,r0,search
-	uxor,nbz	tmp2,r0,save
-
-found_end:				/* at this point d_addr points to word */
-	extru,<>	save,7,8,r0	/* following word with null */
-	addib,tr,n	-4,d_addr,begin_copy	/*set d_addr to end of s1 */
-	extru,<>	save,15,8,r0
-	addib,tr,n	-3,d_addr,begin_copy
-	extru,<>	save,23,8,r0
-	addi		-1,d_addr,d_addr
-	addi		-1,d_addr,d_addr
-
-
-begin_copy:
-
-        extru       s_addr,31,2,tmp1   /* Extract the low two bits of the source address. */
-        extru       d_addr,31,2,tmp6   /* Extract the low two bits of the destination address. */
-        sub,=       tmp6,tmp1,tmp3     /* Compute the shift quantity and don't branch if tmp6=tmp1. */
-        b           not_aligned        /* Not_aligned says that shifts Will be needed. */
-        dep         0,31,2,s_addr      /* Compute the word address of the source.  DELAY SLOT. */
-/* aligned */
-
-	combt,=		tmp6,r0,skip_mask
-        ldwm        	4(0,s_addr),tmp1   /* tmp1 = *s_addr   s_addr += 4 (DELAY SLOT) */
-	sh3add		tmp6,r0,save
-	mtctl		save,r11
-	zvdepi		-2,32,save
-	or		save,tmp1,tmp1
-	uxor,nbz	tmp1,r0,save
-	b,n		first_null	/* special case: null in first word */
-	b,n		skip_mask2
-
-chunks:
-	b,n		null_found	/* delay slot for uxor below */
-
-skip_mask2:
-	stbys,b,m	tmp1,4(d_addr)
-	ldwm		4(s_addr),tmp1
-skip_mask:
-	comib,tr	0,0,chunks
-	uxor,nbz	tmp1,r0,save
-
-/* Begin non_aligned code.  */
-
-not_aligned:
-        sh3add,>=       tmp3,r0,tmp4        /* compute the shift amt.and skip load if tmp6 > tmp1. */
-        ldwm         	4(0,s_addr),tmp1    /* load up the first word from the source. tmp1 = *s_addr++ */
-        ldwm        	4(0,s_addr),tmp2    /* get either first or second word from source.  */
-	combt,=		tmp6,r0,chunk2      /* don't mask if whole word is valid */
-        mtctl        	tmp4,11             /* load the shift count into cr11 = shift count register. */
-        vshd        	tmp1,tmp2,tmp3      /* position data !  (delay slot) */
-	sh3add		tmp6,r0,save  	    /* setup r1 */
-	mtctl		save,r11	    /* set-up cr11 for mask */
-	zvdepi		-2,32,save
-	or		save, tmp3, tmp3
-	uxor,nbz	tmp3,r0,save
-	b,n		first_null2
-	b		did_mask
-        mtctl        	tmp4,11            /* re-load the shift count into cr11 */
-
-chunk2:
-	vshd		tmp1,tmp2,tmp3
-	uxor,nbz	tmp3, r0, save
-	b,n		null_found
-did_mask:
-        stbys,b,m   	tmp3,4(0,d_addr)    /* store !  */
-
-        ldwm        	4(0,s_addr),tmp1    /* get next word !  */
-        vshd        	tmp2,tmp1,tmp3      /* position data !  */
-	uxor,nbz	tmp3, r0, save
-	b,n		null_found
-	stwm		tmp3,4(d_addr)
-	comib,tr	0,0,chunk2
-	ldwm		4(s_addr),tmp2
-
-
-null_found:				/* adjust d_addr and store final word */
-
-	extru,<>	save,7,8,r0
-	addib,tr,n	1,d_addr,store_final
-	extru,<>	save,15,8,r0
-	addib,tr,n	2,d_addr,store_final
-	extru,<> 	save,23,8,r0
-	addib,tr	3,d_addr,store_final2
-	bv		0(r2)
-	stw		save,0(d_addr)
-
-store_final:
-	bv		0(r2)
-store_final2:
-	stbys,e		save,0(d_addr) 	/* delay slot */
-
-first_null:			/* null found in first word of aligned (wrt d_addr) */
-	addi		-4,s_addr,s_addr
-	ldbx		tmp6(s_addr),tmp4
-	add		tmp6,s_addr,s_addr
-	comib,=		0,tmp4,done
-	stbs,ma		tmp4,1(d_addr)
-	ldbs		1(s_addr),tmp4
-	comib,=		0,tmp4,done
-	stbs,ma		tmp4,1(d_addr)
-	bv		0(r2)		/* done */
-	stbs		0,0(d_addr)
-
-first_null2:	/* null found in first word of non-aligned (wrt d_addr) */
-	addibt,=	-1,tmp6,check3	/* check last 3 bytes of word */
-	extru   	save,15,8,tmp4
-	addibt,=,n	-1,tmp6,check2	/* check last 2 bytes */
-	bv		0(r2)
-	stbys,b		save, 0(d_addr)
-
-check3:
-	combt,=		tmp4,r0,done
-	stbs,ma		tmp4,1(d_addr)
-check2:
-	extru,<>	save,23,8,tmp4
-	bv		0(r2)
-	stbs,ma		tmp4,1(d_addr)
-	bv		0(r2)
-	stbs		r0,0(d_addr)
-
-done:
-EXIT(strcat)